2002-2009 Dodge Ram 2500. Power Seat Track front vertical motor, NEW

Description

Please read the vehicle year and model statement below for fitment of your power seat assembly.
This is a brand new up/down
front vertical
replacement motor for
02-09 Dodge Ram 2500,3500, 4500 and 5500
trucks with power seats. 02 Rams please check your motor type. Some trucks use the older style of motor.
It will replace your factory unit. Your electrical connector will plug directly into this motor. This is not used, but brand new. It will work for the
front
up/down adjustment motor. The factory
front
up down motor has a metal casing and a white end cap. The shaft is shorter than the rear up down motor, so please verify the motor you need. Replaces factory part number:
Gen II B
Vertical
8-82991 or
L0110346AA01
5609780 or
5719240
or 5609820
If you have a 2006 Ram 1500 or newer, please check the part numbers on your motor against what I have listed above.  I have seen some 2006 1500's with different types of motors.
I sell both vertical motors on ebay. If you need the other, please check out my other auctions.
You will have to reuse your tube nut off the old shaft.  The factory constant section ring must be removed from the old shaft in order to unscrew the tube nut.  The constant section ring is a thick piece of wire that holds a bushing on the shaft end.  If removing the section ring becomes a problem, you can cut the old shaft close to the motor and unscrew the tube nut from the cut end. This is the method I prefer.
The screw holding the tube nut on the new shaft is left hand thread. A small socket can be used to tighten it, but you might have to spread the ends apart some. This won't affect the operation of the motor assembly.
Detailed install instructions with photos are included.
Check out my feedback to see other buyers comments on these motors.
Refunds:
Unit must not be damaged or altered.
Please contact me with any questions.
2men1garage